Side view of pilot pin

Pilot Pins for Annular Cutters

  • Material: SUJ2 Steel
  • Hardness: HRC58+2
  • Always use the recommended pilot pin when using annular cutters
  • Centres and stabilises annular cutter while drilling
  • Delivers the coolant and ejects the core once finished cutting
Product Code
  • Product Specifications

    Product Code For Size Pin I.D. Overall Length
    49485310 12-13mm x 30mm 4.75 x 3.6mm 75mm
    49485311 12-13mm x 55mm 4.75 x 3.6mm 100mm
    49485312 14-70mm x 30mm 6.30 x 4.8mm 75mm
    49485313 14-70mm x 55mm 6.35 x 4.8mm 100mm


  • Tip

    Check the Pilot pin is able to move freely by occasionally depressing the pilot. Check to ensure cutting fluid is Flowing and that the groove is not blocked. Always ensure that the slug has been ejected from the previous hole before cuting the next


Nogard Australia logo

Nogard Australia acknowledge the traditional custodians of the lands in which we operate in Australia. We recognise and pay respects to their Elders, past, present and emerging as well as their unique connection and spiritual relationship to the land and its waterways. Nogard Australia recognises the rich contribution that Aboriginal and Torres Strait Islander people and culture make to society.